The 23rd China International Petroleum & Petrochemical Technology & Equipment Exhibition - International Petroleum & Petrochemical Industry Convention was held in Beijing - China International Exhibition Center (New Hall) from May 31 to June 2, 2023. XBSY participated in this exhibition with four new products: single negative pressure elliptical shale shaker, intelligent centrifuge, double drive vertical dryer and double mechanical seal sand pump.
The petroleum and petrochemical technology and equipment exhibition (CIPPE) attracted 1,800 exhibitors from 65 countries and regions, 46 of the world's top 500 companies, 18 international pavilions, 120,000 professional visitors, and an exhibition area of 90,000 square meters, and has become an annual world petroleum equipment conference.
XBSY is a national high-tech enterprise, provincial enterprise technology center, and national intellectual property advantage enterprise. In this exhibition, the company organized a number of professional and experienced technicians and sales personnel to participate. During the exhibition, we explained the latest technology and solutions of our company to the guests who came to the exhibition, and explained to them the experience of using the exhibited products in the oilfield field from multiple angles, which won them high praise and wide acclaim. At the same time, we discussed and shared the future development opportunities and challenges of oilfield solids control and environmental protection equipment industry under the new situation with our industry colleagues.
Exhibits Introduction
Negative Pressure Shale Shaker
XBSY's negative pressure shale shaker uses both vibration and negative pressure suction to separate the liquid phase attached to the surface of the rock chips from the chips, resulting in less drilling fluid consumption and higher treatment capacity; at the same time, it fully reduces the loss of mud and the liquid content of the rock chips, ultimately reducing drilling costs.
- Adopted 1165 × 585 × 40 standard frame screen with five screen frames design.
- Equipped with the intellectual property rights of gas-liquid separation units.
- The single-channel pulsed negative pressure vacuum system reduces the paste and improves the dryness.
- Patented fast-pressing screen - easy to replace the screen.
- The double-screw mechanical synchronous lifting device - start and stop at any time within the tilt range.
- Large-capacity mechanical lifting gate mud box, accurate and adjustable opening degree.
- External overflow solution for centralized treatment of highly concentrated low-solid mud.
- All-around anti-splash design to reduce mud splashing to a minimum.
- Low maintenance, low operating costs, and energy savings.
VFD intelligent frequency conversion high-speed centrifuge
XBSY VFD intelligent frequency conversion high-speed centrifuge is controlled by PLC programming, and the bowl speed can be steplessly adjusted within the design range.
- PLC Programming Control - Bowl speed can be steplessly adjusted within the design range.
- Equipped with color explosion-proof touch screen, real-time view of speed, current, torque, bearing temperature, whole machine vibration, differential speed, etc.
- Intelligent control, easy operation, large processing capacity, good effect, and low failure rate.
Dual Drive Vertical Dryer
XBSY's LL700 model for oil-based drilling mud reduction at land-based well sites and LL915 model for oil-based drilling mud reduction at offshore rigs or centralized disposal sites are the main equipment for oil-based drilling mud reduction.
- Large processing capacity, strong anti-clogging ability, integral design for easier installation and transportation.
- One-piece lubrication station design, with lubrication and heat dissipation, easier installation and maintenance.
- High-hardness surface spraying scraper and high-strength wear-resistant screen baskets ensure long service life.
- Spindle speed control has strong adaptability, logic electric control, multiple safety protection.
- Anti-corrosion coating process - adapt to various harsh environments.
Centrifugal Pumps
XBSY currently has five categories of centrifugal pumps, SB6×8, SB5×6, SB4×5, SB3×4, and SB2×3, with more than 80 specifications from 4kW to 75kW according to the matching power. There are two structural forms of direct connection and belt drive, which can adapt to the needs of 50 and 60HZ power grids, and there are two standards of the metric and imperial systems respectively. There are two kinds of rotary direction: forward and reverse.
- No leakage: patented sealing technology, the service life is 6 times longer than an ordinary mechanical seal.
- High efficiency：The impeller and pump casing flow channel adopt the best-streamlined design.
- Long life：The overflow parts are made of high wear-resistant cast iron.
- Non-clogging：The impeller is designed with a wide flow path.
- Nice appearance：patented design, compact and reasonable overall structure.
XBSY's exhibition conveyed the sustainable development concept of green and low-carbon transformation to the public, and strengthened the connection with more famous enterprises. In the future, XBSY will continue to improve its corporate strength, adhere to the concept of sustainable development, implement the national ecological and environmental protection policies, deepen cooperation with strategic partners, seek common development and create a common future, and work together to promote the concept of green and low-carbon transformation and development of environmental protection.
